 |
|
 |
 |
 |
| Lisa |
Cribs
Consider the following tips when shopping for a crib, and both you and your baby will sleep better.
That beautiful, antique crib in Grandma's attic may better serve a museum than your new baby. According to the U.S. Consumer Product Safety Commission, only cribs made after 1991 are likely to meet all current safety standards. Because a crib is the only children's product manufactured with the intention that a child will be left unattended, parents should be extremely careful in the selection process.
 |
Slats should be no wider than 2 3/8" apart, to ensure that your baby's body cannot slip through.
|
 |
Corner posts should protrude no further than 1/16" above the end panels. Decorative knobs and posts present a hazard of entangling your child in clothing.
|
 |
The mattress should fit snugly with no more than two finger widths between the edge of the mattress and the crib side. A square cornered mattress works best and provides the best in safety.
|
 |
For added security, use bumper pads for newborns and very small babies. Be sure to remove bumper pads when your baby becomes more active.
|
 |
Avoid using a crib that has been painted over by a previous owner. Lead paint can pose a serious risk to your baby.
|
 |
Pass up any crib with decorative cutouts that can trap a child's head or limbs.
|
Keep It Safe
Even if you buy the top-of-the-line crib, it will only protect your baby if it is correctly assembled and maintained. Consider the following advice:
 |
Follow assembly instructions carefully.
|
 |
Periodically tighten all nuts, bolts, and screws.
|
 |
Check teething rails for cracks. Replace rails when sharp edges appear.
|
 |
If you move the crib, or change the height of the mattress, be sure all support hangers are secure.
|
 |
Check the hooks regularly. A bent or broken hook may allow the mattress to fall and trap your baby.
|
For more information on crib safety and other nursery equipment, contact the Consumer Products Safety Commission at 1-800-638-2772.
|
 |